GET A QUOTE

Products

STAINLESS STEEL PLATES & SHEETS Plates & Sheet

Specification of Stainless Steel 253MA Plates & Sheets

GradesStainless Steel 253MA (UNS S30815)
SpecificationsASTM A240, A480, A167
Thickness1.0mm - 100mm
Width1000mm-2000mm
ProductionHot-Rolled (HR) / Cold-Rolled (CR)

Chemical Composition of Stainless Steel 253MA Plates & Sheets

CrNiSiCMnPSNCeFe
MIN20101.40.05---0.140.03Balance
MAX221220.10.80.040.030.20.08

Social

CARBON STEEL PLATES & SHEETS Plates & Sheet

Specification of API 5l Carbon Steel Plates & Sheets

GradesAPI 5L GR. X52 / X56 / X60 / X65 / X70 etc
Thickness1mm - 300mm
Width1000mm - 3000mmk
ProductionHot-Rolled (HR) / Cold-Rolled (CR)

Chemical & Mechanical Properties of API 5l Carbon Steel Plates & Sheets

GradeChemical Composition       Yield StrengthTensile StrengthYield to TensileElongation
 CSiMnPSVNbTimin. (KSI)min. (KSI)Ratio (max)%
API 5L X520.160.451.650.020.010.070.050.0452660.9321
API 5L X560.160.451.650.020.010.070.050.0456710.9319
API 5L X600.160.451.650.020.010.080.050.0460750.9319
API 5L X650.160.451.650.020.010.090.050.0665770.9318
API 5L X700.170.451.750.020.010.10.050.0670820.9317

Social

MONEL PLATES & SHEETS Plates & Sheet

Specification of Monel Alloy Plates & Sheets

GradesMonel 400 (UNS No. N04400)/Monel K500 (UNS No. N05500)
SpecificationsASTM B / ASME SB 127
Thickness1.0mm - 200mm
Width1000mm - 3000mm
ProductionHot Rolled (HR) / Cold Rolled (CR)

Chemical Composition of Monel Alloy Plates & Sheets

GradeNiFeCMnSiCuAlTiS
K50063.0 min02-May0.25 max1.5 max0.5 max27.0 - 33.02.3 - 3.150.35 - 0.850.010 max
40063.0- 70.00 max2.50 max0.3 max2.00 max0.50 maxRemainder--0.024 max

Mechanical Properties of Monel Alloy Plates & Sheets

GradeTensile (ksi).2% Yield (ksi)Elongation %Hardness (HRb)
40075 to 9025 to 5060 to 3560 to 80
K500Psi - 1,60,000 , MPa - 1100Psi - 1,15,000 , MPa - 79020%-

Social

NICKEL ALLOY PLATES & SHEETS Plates & Sheet

Specification of Nickel Alloy Plates & Sheets

GradesNickel Alloy 200 (UNS No. N02200), Nickel Alloy 201 (UNS No. N02201)
SpecificationsASTM / ASME B 161/ 162 / 163, ASTM / ASME B 725/730
Thickness0.05mm - 50mm
Width1000mm - 3000mm
ProductionHot Rolled (HR) / Cold Rolled (CR)
FormsFoils, Shims , Strip , Flats , etc

Chemical Composition of Nickel Alloy Plates & Sheets

Material / Purity:Alloy 200Alloy 201
Ni9999
Fe0.40.4
Mn0.350.35
Si0.350.35
C0.150.02
S0.010.01
Cu0.250.25

Mechanical Properties of Nickel Alloy Plates & Sheets

Nickel Alloy 201  
PropertiesMetricImperial
Tensile strength (annealed)403 MPa58500 psi
Yield strength (annealed)103 MPa14900 psi
Elongation at break (annealed prior to test)50%50%
Nickel Alloy 200  
PropertiesMetricImperial
Tensile strength (annealed)462 MPa67000 psi
Yield strength (annealed)148 MPa21500 psi
Elongation at break (annealed prior to test)45%45%

Social

INCONEL ALLOY PLATES & SHEETS Plates & Sheet

Specification of Inconel Alloy Plates & Sheets

GradesInconel 600 (UNS N06600), Inconel 601(UNS N06601), Inconel 625 (UNS N06625), Inconel 718 (UNS NO7718)
SpecificationsASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443
Thickness1.0mm - 200mm
Width1000mm - 3000mm
ProductionHot Rolled (HR) / Cold Rolled (CR)

Chemical Composition of Inconel Alloy Plates & Sheets

GradeNiFeCMnSiCuCrSMoCoAlTiPNb/CbTa
60072.0 min6.0 - 10.00.15 max1.0 max0.5 max0.5 max14.0 - 17.00.015 max-------
60158.0 - 63.0Balance0.10 max1.0 max0.50 max1.0 max21.0 - 25.00.015 max8.0-10.0-1.0 - 1.7----
62558.0 min50.10 max0.50 max0.50 max0.5 max20.0 - 23.00.015 max8.00 - 10.0010.40.40.0153.15 - 4.150.05
71850.00-55.00Remainder0.08 max0.35 max0.35 max0.30 max max17.00-21.000.015 max2.80-3.3011.00 max0.65-1.150.015 max4.75-5.50-

Mechanical Properties of Inconel Alloy 600/601 Plates & Sheets

GradeTensile (psi).2% Yield (psi)Elongation (%)
60095,00045,00040
60180,00030,00035

Mechanical Properties of Inconel Alloy 625 Plates & Sheets

Temp° FTensile (psi).2% Yield (psi)Elongation in 2 " (%)
70144,00084,00044
400134,00066,00045
600132,00063,00042.5
800131,50061,00045
1000130,00060,50048
1200119,00060,00034
140078,00058,50059
160040,00039,000117

Social

INCOLOY ALLOY PLATES & SHEETS Plates & Sheet

Specification of Incoloy Alloy Plates & Sheets

GradesIncoloy 800 (UNS N08800), Incoloy 800H (UNS N08810), Incoloy 800HT (UNS N08811), Incoloy 825(UNS N08825)
SpecificationsASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443
Thickness1.0mm - 200mm
Width1000mm - 3000mm
ProductionHot Rolled (HR) / Cold Rolled (CR)

Chemical Composition of Incoloy Alloy Plates & Sheets

Incoloy800800H825
Ni30-3530-3538.0 - 46.0
Fe39.5 min39.5 min22.0 min
Cr19-2319-2319.5 - 23.5
Cu0.75 max0.75 max1.5 - 3.0
Ti0.15-0.600.15-0.600.6 - 1.2
Al0.15-0.600.15-0.600.2 max
C0.1 max0.05-0.10.05 max
Mn1.5 max1.5 max1.0 max
S0.015 max0.015 max0.015 max
Si1.0 max1.0 max0.5 max
Mb--2.5 - 3.5

Mechanical Properties of Incoloy Alloy Plates & Sheets

Inconel 800/800HT 
Tensile StrengthPsi â€" 75,000 , MPa â€" 520
Yield Strength (0.2%Offset)Psi â€" 30,000 , MPa â€"205
Elongation30%
Inconel 825 
Tensile StrengthPsi - 80,000 , MPa - 550
Yield Strength (0.2%Offset)Psi - 32,000 , MPa -220
Elongation30%

Social

HASTELLOY PLATES & SHEETS Plates & Sheet

Specification of Hastelloy Plates & Sheets

GradesHastelloy C22 (UNS No. N06022), Hastelloy C276 (UNS N10276)
SpecificationsASTM / ASME SB 575, ASTM / ASME SB 333
Thickness1.0mm - 200mm
Width1000mm - 3000mm
ProductionHot Rolled (HR) / Cold Rolled (CR)

Chemical Composition of Hastelloy Plates & Sheets

GradeCMnSiSCoNiCrFeMoP
C2760.010 max1.00 max0.08 max0.03 max2.50 max50.99 min*14.50 - 16.504.00 - 7.0015.00 - 17.000.04 max
C220.010 max0.50 max0.08 max0.02 max2.50 max50.015 min*20.00 - 22.502.00 - 6.0012.50 - 14.500.02 max

Mechanical Properties of Hastelloy Plates & Sheets

ElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
Hastelloy C2768.89 g/cm31370 °C (2500 °F)Psi - 1,15,000 , MPa - 790Psi - 52,000 , MPa - 35540%
Hastelloy C228.69 g/cm31399 °C (2550 °F)Psi - 1,00,000 , MPa - 690Psi - 45000 , MPa - 31045%

Social

COPPER NICKEL PLATES & SHEETS Plates & Sheet

Specification of Copper Nickel Alloy Plates & Sheets

GradesCU-NI-70/30 (UNS No C71500) / CU-NI-90/10 (UNS No C70600)
SpecificationsASTM B171, ASME SB171
Thickness1mm - 100mm
Width1000mm - 3000mm
ProductionHot Rolled (HR) / Cold Rolled (CR)

Chemical Composition of Copper Nickel Alloy Plates & Sheets

GradeCuMnPbNiFeZn
Cu-Ni 90-1088.6 min1.0 max.05 max9-11 max1.8 max1 max
Cu-Ni 70-3065.0 min1 max.05 max29-330.4-1.01 max

Mechanical Properties of Copper Nickel Alloy Plates & Sheets

ElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
Copper Nickel 90-10 / 70-300.323 lb/in3 at 68 F2260 F50000 psi20000 psi30%

Social

ALLOY STEEL PLATES & SHEETS Plates & Sheet

Specification of Alloy Steel Plates & Sheets

GradesAlloy Steel F5 / F9 / F11 / F12 / F22 / F91 / F92
SpecificationsASTM A387 / ASME SA387
Thickness1.0mm - 200mm
Width1000mm - 3000mm
ProductionHot Rolled (HR) / Cold Rolled (CR)

Chemical Composition of Alloy Steel Plates & Sheets

GradeCMnSiSPCrMo
A182 F50.150.3 - 0.60.50.030.0306-Apr0.044 - 0.65
A182 F90.150.3 - 0.60.5 - 10.030.0310-Aug0.9 - 1.1
A182 F110.05 - 0.150.3 - 0.60.5 - 10.030.031 - 1.50.044 - 0.65
A182 F220.05 - 0.150.3 - 0.60.50.030.0450.8 - 1.250.044 - 0.65
A182 F910.08 - 0.120.3 - 0.60.50.010.028.5 - 9.50.85 - 1.05

Mechanical Properties of Alloy Steel Plates & Sheets

GradeTensile Strength (Mpa)Yield Strength (Mpa)Elongation %
A182 F527548520
A182 F538058520
A182 F1120541520
A182 F1227548520
A182 F520541520
A182 F9141558520

Social

ALLOY 20 PLATES & SHEETS Plates & Sheet

Specification of Alloy 20 Plates & Sheets

GradesAlloy 20 (UNS N08020)
SpecificationsASTM B 463, ASME SB 463
Thickness1.0mm - 200mm
Width1000mm - 3000mm
ProductionHot Rolled (HR) / Cold Rolled (CR)

Chemical Composition of Alloy 20 Plates & Sheets

NiFeCMnSiCuCrMoSPNb
32 - 38Bal0.02 max02-Jan0.7 max04-Mar19 - 2103-Feb0.005 max0.02 max0.1 - 0.3

Mechanical Properties of Alloy 20 Plates & Sheets

DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
8.1 g/cm31443 °C (2430 °F)Psi -80,000, MPa -551Psi - 35,000, MPa - 24130%

Social

DUPLEX STEEL PLATES & SHEETS Plates & Sheet

Specification of Duplex Steel UNS S31803 / F51 Plates & Sheets

GradesDuplex Stainless 2205 (UNS N0 S31803 / S32205) / F51
SpecificationsASTM A240 / ASME SA240
Thickness1.0mm - 200mm
Width1000mm - 3000mm
ProductionHot Rolled (HR) / Cold Rolled (CR)

Chemical Composition of Duplex Steel F51 Plates & Sheets

GradeNiCrNCMnPSSiMo
Duplex Steel4.5 - 6.522 - 230.14 - 0.20.030 max2.0 max0.030 max0.02 max1 max3 - 3.5

Mechanical Properties of Duplex Steel F51 Plates & Sheets

DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
7.8 g/cm31440 °C (2625 °F)Psi - 90000 , MPa - 620Psi - 65000 , MPa - 45030%

Social

SUPER DUPLEX STEEL PLATES & SHEETS Plates & Sheet

Specification of Super Duplex Steel 2507 Plates & Sheets

GradesSuper Duplex Steel 2507 (UNS S32507)
SpecificationsASTM A240 / ASME SA240
Thickness1.0mm - 200mm
Width1000mm - 3000mm
ProductionHot Rolled (HR) / Cold Rolled (CR)

Chemical Composition of Super Duplex F53 Steel Plates & Sheets

GradeCNiCrCuFeNMnSiSMoP
Super Duplex S327500.030 max6 - 824 - 260.50 maxBalance0.24 - 0.321.20 max0.80 max0.020 max3 - 50.035 max

Mechanical Properties of Super Duplex F53 Steel Plates & Sheets

DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
7.8 g/cm31350 °C (2460 °F)Psi - 116000 , MPa - 800Psi - 80000 , MPa - 55015%

Social

TITANIUM PLATES & SHEETS Plates & Sheet

Specification of Titanium Alloys Plates & Sheets

GradesTitanium GR-1 (UNS R50250), Titanium Grade 2 (UNS No. R50400), Titanium Grade 5 (UNS No. R56400), Titanium Grade 9 (UNS No. R56320)
DimensionDIN, ASTM, BS and all International Standards
SpecificationsGB / T 3621 -44 , ASTM B 265, ASME SB 265
Thickness1mm - 100mm
Width1000mm - 3000mm
ProductionHot Rolled (HR) / Cold Rolled (CR)

Chemical Composition of Titanium Alloys Plates & Sheets

Typical corresponding standardChemical composition(wt%)        
 NCHFeOAlVTiOther elements
JIS Class 1≦0.03≦0.08≦0.013≦0.20≦0.15--Bal 
ASTM Grade 1≦0.03≦0.08≦0.015≦0.20≦0.18--Bal 
DIN3.7025≦0.03≦0.06≦0.013≦0.15≦0.12--Bal 
JIS Class 2≦0.03≦0.08≦0.013≦0.25≦0.20--Bal 
ASTM Grade 2≦0.03≦0.08≦0.015≦0.30≦0.25--Bal 
DIN3.7035≦0.05≦0.06≦0.013≦0.20≦0.18--Bal 
JIS Class 3≦0.05≦0.08≦0.013≦0.30≦0.30--Bal 
ASTM Grade 3≦0.05≦0.08≦0.015≦0.30≦0.35--Bal 
DIN3.7055≦0.05≦0.06≦0.013≦0.25≦0.25--Bal 
JIS Class 4≦0.05≦0.08≦0.013≦0.50≦0.40--Bal 
ASTM Grade 4≦0.05≦0.08≦0.015≦0.50≦0.40--Bal 
DIN3.7065≦0.05≦0.06≦0.013≦0.30≦0.35--Bal

Mechanical Properties of Titanium Alloys Plates & Sheets

Typical corresponding standardTensile strength0.2% Yield strengthElongationReduction of area180° bendingHardnessHeat treatment condition
 (N/mm2)(N/mm2)(%)(%)（inner redius）(HB) 
JIS Class 1270~410≧165≧27-2T≧100Annealing
ASTM Grade 1≧240≧170≧24≧30--Annealing
DIN3.7025290~410≧180≧30---Annealing
JIS Class 2340~510≧210≧23-2T≧100Annealing
ASTM Grade 2≧345≧275≧20≧30--Annealing
DIN3.7035390~540≧250≧22---Annealing
JIS Class 3480~620≧345≧18-3T≧150Annealing
ASTM Grade 3≧450≧380≧18≧30--Annealing
DIN3.7055460~590≧320≧18---Annealing
JIS Class 4550~750≧485≧15-3T≧180Annealing
ASTM Grade 4≧550≧483≧15≧25--Annealing
DIN3.7065540~740≧390≧16---Annealing

Social