Products Details

Round Bars & Rods - ALUMINIUM ALLOY ROUND BARS & RODS

Specification of Aluminium Alloy Round Bars & Rods

Grades	Aluminium Alloy 2024, 2014, 2A14, 2A50, 3003, 4032, 5052, 5056, 5082, 5083, 5754 , 6060, 6061, 6063, 6005, 6082, 6A02, 7005, 7A04,7075,7A09, K70, G77, AHS , 19000, 19500, 19501, 19600, 19700, etc
Temper	F, O, R, T4, T5,T6,T651,T731, H, etc
Range	5mm to 350mm Dia
Length	100mm to 6000mm
Form	Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.
Finish	Bright, Polish & Black

Chemical Composition of Aluminium Alloy Round Bars & Rods

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	OTHERS	OTHERS	Al
									EACH	TOTAL	MIN.
1070	0.2	0.25	0.04	0.03	0.03	—	0.04	0.03	0.03	—	99.7
1060	0.25	0.35	0.05	0.03	0.03	—	0.05	0.03	0.03	—	99.6

1050	0.25	0.4	0.05	0.05	0.05	—	0.05	0.03	0.03	—	99.5
1350	0.1	0.4	0.05	0.01	—	0.01	0.05	—	0.03	0.1	99.5
1145	0.55 Si + Fe		0.05	0.05	0.05	—	0.05	0.03	0.03	—	99.45
1100	0.95 Si + Fe		0.05-0.20	0.05	—	—	0.1	—	0.05	0.15	99
2024	0.5	0.5	3.8-4.9	0.30-0.9	1.2-1.8	0.1	0.25	0.15	0.05	0.15	Rem.

3003	0.6	0.7	0.05-0.20	1.0-1.5	—	—	0.1	—	0.05	0.15	Rem.

3004	0.3	0.7	0.25	1.0-1.5	0.8-1.3	—	0.25	—	0.05	0.15	Rem.

3005	0.6	0.7	0.3	1.0-1.5	0.20-0.6	0.1	0.25	0.1	0.05	0.15	Rem.

3104	0.6	0.8	0.05-0.25	0.8-1.4	0.8-1.3	—	0.25	0.1	0.05	0.15	Rem.

4004	9.0-10.5	0.8	0.25	0.1	1.0-2.0	—	0.2	—	0.05	0.15	Rem.

4104	9.0-10.5	0.8	0.25	0.1	1.0-2.0	—	0.2	—	0.05	0.15	Rem.

4043	4.5-6.0	0.8	0.3	0.05	0.05	—	0.1	0.2	0.05	0.15	Rem.

4045	9.0-11.0	0.8	0.3	0.05	0.05	—	0.1	0.2	0.05	0.15	Rem.

5005	0.3	0.7	0.2	0.2	0.50-1.1	0.1	0.25	—	0.05	0.15	Rem.

5050	0.4	0.7	0.2	0.1	1.1-1.8	0.1	0.25	—	0.05	0.15	Rem.

5052	0.25	0.4	0.1	0.1	2.2-2.8	0.15-0.35	0.1	—	0.05	0.15	Rem.

5252	0.08	0.1	0.1	0.1	2.2-2.8	—	0.05	—	0.03	0.1	Rem.

5056	0.3	0.4	0.1	0.05-0.20	4.5-5.6	0.05-0.20	0.1	—	0.05	0.15	Rem.

5657	0.08	0.1	0.1	0.03	0.6-1.0	—	0.05	—	0.02	0.05	Rem.
5182	0.2	0.35	0.15	0.20-0.50	4.0-5.0	0.1	0.25	0.1	0.05	0.15	Rem.
6061	0.40-0.8	0.7	0.15-0.40	0.15	0.8-1.2	0.04-0.35	0.25	0.15	0.05	0.15	Rem.
7075	0.4	0.5	1.2-2.0	0.3	2.1-2.9	0.18-0.28	5.1-6.1	0.2	0.05	0.15	Rem.

Mechanical Properties of Aluminium Alloy Round Bars & Rods

		Tensile	Yield	Elongation (%) for the		Tensile	Yield	Elongation (%) for the
		Strength	Strength	following gauge ranges:		Strength	Strength	following gauge ranges:
Alloy	Temper	(ksi)	(ksi)	0.010-0.050˝	0.051-.125˝	(MPa)	(MPa)	0.25-1.25mm	1.26-3.0mm
1100	O	13	5	30	32	89.6	34.5	30	6
	H12	16	15	4	12	110.3	103.4	4	12
	H14	18	17	3	10	124.1	117.2	3	10
	H16	21	20	2	8	144.8	137.9	2	8
	H18	24	22	2	6	165.5	151.7	2	6
1350	O	12	4	34	42	82.7	27.6	34	42
	H12	14	12	5	12	96.5	82.7	5	12
	H14	16	14	3	9	110.3	96.5	3	9
	H16	18	16	3	8	124.1	110.3	3	8
	H19	27	24	2	6	186.2	165.5	2	6
2024	O	27	11	18	20	186.2	75.8	18	20
	T3	70	50	16	18	482.6	344.7	16	18
	T4	68	47	20	19	468.8	324.1	20	19
3003	O	16	6	30	33	110.3	41.4	30	33
	H12	19	18	9	11	131	124.1	9	11
	H14	22	21	3	7	151.7	144.8	3	7
	H16	26	25	3	5	179.3	172.4	3	5
	H18	29	27	3	5	199.9	186.2	3	5
3004	O	26	10	19	23	179.3	68.9	19	23
	H32	31	25	6	15	213.7	172.4	6	15
	H34	35	29	5	10	241.3	199.9	5	10
	H36	38	33	5	8	262	227.5	5	8
	H38	41	36	4	6	282.7	248.2	4	6
3005	O	20	8	22	23	137.9	55.2	22	23
	H12	26	24	5	13	179.3	165.5	5	13
	H14	29	28	4	9	199.9	193.1	4	9
	H16	31	30	3	5	213.7	206.8	3	5
	H18	37	36	2	3	255.1	248.2	2	3
5005	O	18	6	22	25	124.1	41.4	22	25
	H12	20	19	5	9	137.9	131	5	9
	H14	23	22	4	7	158.6	151.7	4	7
	H16	26	25	3	5	179.3	172.4	3	5
	H18	29	28	2	2	199.9	193.1	2	2
	H32	20	17	8	9	137.9	117.2	8	9
	H34	23	20	6	8	158.6	137.9	6	8
	H36	26	24	5	6	179.3	165.5	5	6
	H38	29	27	3	4	199.9	186.2	3	4
5050	O	21	8	20	25	144.8	55.2	20	25
	H32	25	21	9	13	172.4	144.8	9	13
	H34	28	24	5	10	193.1	165.5	5	10
	H36	30	26	4	7	206.8	179.3	4	7
	H38	32	29	2	4	220.6	199.9	2	4
5052	O	28	13	20	21	193.1	89.6	20	21
	H32	33	28	7	10	227.5	193.1	7	10
	H34	38	31	6	8	262	213.7	6	8
	H36	40	35	4	5	275.8	241.3	4	5
	H38	42	37	3	4	289.6	255.1	3	4
5056	O	42	22	23	24	289.6	151.7	23	24
	H38	60	50	6	13	413.7	344.7	6	13
5182	O	40	21	21	25	275.8	144.8	21	25
	H32	41	22	20	21	282.7	151.7	20	21
	H34	48	37	11	14	330.9	255.1	11	14
	H36	51	42	9	11	351.6	289.6	9	11
	H38	54	47	6	7	372.3	324.1	6	7
6061	O	18	8	25	26	124.1	55.2	25	26
	T4	35	21	22	24	241.3	144.8	22	24
	T6	45	40	12	17	310.3	275.8	12	17
7075	O	33	15	16	18	227.5	103.4	16	18
	T6	83	73	11	12	572.3	503.3	11	12

Physical Properties of Aluminium Alloy Round Bars & Rods

	Average1			Thermal	Electrical Conductivity at 68°F		Electrical
	Coeffecient of	Melting			(Percent of International		Resistivity
	Thermal			Conductivity	Annealed Copper Standard)		at 68°F
	Expansion	Range 2,3	Density	(English			(Ohms-Cir.
Alloy					Equal	Equal
	68° to 212°F	Approximately	(lbs/cubic in.)	Units4)			Mil/Foot)
	(°F)	(°F)			Volume	Volume

1100	13.1	1190-1215	0.098	1520	59	194	18
1350	13.2	1195-1215	0.0975	1625	62	204	17
2024-O	12.9	935-11805	0.1	1340	50	160	21
2024-T3,T4	12.9	935-11805	0.1	840	30	96	35
2024-T6	12.9	935-11805	0.1	1050	38	122	27
3003	12.9	1190-1210	0.099	1200	48	156	22
3004	13.3	1165-1210	0.098	1100	41	134	25
3005	13.1	1175-1210	0.098	1190	45	148	23
5005	13.2	1170-1210	0.098	1390	52	172	20
5050	13.2	1155-1205	0.097	1340	50	165	21
5052	13.2	1125-1200	0.097	960	35	116	30
5056	13.4	1055-1180	0.096	790	28	95	37
5182	13.4	1055-1180	0.096	790	28	95	37
5657	13.2	1180-1215	0.097	960	35	116	30
6061-O	13.1	1080-12056	0.098	1250	47	155	22
6061-T4	13.1	1080-12056	0.098	1070	40	132	26
6061-T6	13.1	1080-12056	0.098	1160	43	142	24

Products Details

Categories

Get In Touch

Round Bars & Rods - ALUMINIUM ALLOY ROUND BARS & RODS

Specification of Aluminium Alloy Round Bars & Rods

Chemical Composition of Aluminium Alloy Round Bars & Rods

Mechanical Properties of Aluminium Alloy Round Bars & Rods

Physical Properties of Aluminium Alloy Round Bars & Rods