Fastners - NICKEL ALLOY FASTENER
Specification of Nickel Alloy Fasteners
Grades | Nickel Alloy 200 (UNS No. N02200), Nickel Alloy 201 (UNS No. N02201) |
---|---|
Standard | ASTM, BS, IS |
Specifications | ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472 |
Size | M02 to M30 |
Length | 3 mm To 200 mm |
Type | Nuts, Bolts, Screws, Sockets, Studs, Screw, Hex Set Screw, Socket Screw, Cap Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Spring Washers, Studs, Anchors, Marine Anchors, Nut, Hexagon Nut, Hex Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Socket Hexagon Head Screw Anchor Bolt, U- Bolts, J Bolts, Mushroom Head Square Neck Bolts, T-Head Bolts, Wing Screw, Eye Bolt, Foundation Bolts, Structural Bolts. |
Chemical Composition of Nickel Alloy Fasteners
Material / Purity: | Alloy 200 | Alloy 201 |
---|---|---|
Ni | 99 | 99 |
Fe | 0.4 | 0.4 |
Mn | 0.35 | 0.35 |
Si | 0.35 | 0.35 |
C | 0.15 | 0.02 |
S | 0.01 | 0.01 |
Cu | 0.25 | 0.25 |
Mechanical Properties of Nickel Alloy Fasteners
Nickel Alloy 201 | ||
---|---|---|
Properties | Metric | Imperial |
Tensile strength (annealed) | 403 MPa | 58500 psi |
Yield strength (annealed) | 103 MPa | 14900 psi |
Elongation at break (annealed prior to test) | 50% | 50% |
Nickel Alloy 200 | ||
Properties | Metric | Imperial |
Tensile strength (annealed) | 462 MPa | 67000 psi |
Yield strength (annealed) | 148 MPa | 21500 psi |
Elongation at break (annealed prior to test) | 45% | 45% |