Fastners - INCOLOY ALLOY FASTENER
Specification of Incoloy Alloy Fasteners
Grades | Incoloy 800 (UNS N08800), Incoloy 800H (UNS N08810), Incoloy 800HT (UNS N08811), Incoloy 825(UNS N08825) |
---|---|
Standard | DIN, ASTM, BS and all International Standards |
Specifications | ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472 |
Size | M10 TO M100 |
Length | Upto 1 Meters |
Type | Nuts, Bolts, Screws, Sockets, Studs, Screw, Hex Set Screw, Socket Screw, Cap Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Spring Washers, Studs, Anchors, Marine Anchors, Nut, Hexagon Nut, Hex Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Socket Hexagon Head Screw Anchor Bolt, U- Bolts, J Bolts, Mushroom Head Square Neck Bolts, T-Head Bolts, Wing Screw, Eye Bolt, Foundation Bolts, Structural Bolts. |
Chemical Composition of Incoloy Alloy Fasteners
Incoloy | 800 | 800H | 825 |
---|---|---|---|
Ni | 30-35 | 30-35 | 38.0 - 46.0 |
Fe | 39.5 min | 39.5 min | 22.0 min |
Cr | 19-23 | 19-23 | 19.5 - 23.5 |
Cu | 0.75 max | 0.75 max | 1.5 - 3.0 |
Ti | 0.15-0.60 | 0.15-0.60 | 0.6 - 1.2 |
Al | 0.15-0.60 | 0.15-0.60 | 0.2 max |
C | 0.1 max | 0.05-0.1 | 0.05 max |
Mn | 1.5 max | 1.5 max | 1.0 max |
S | 0.015 max | 0.015 max | 0.015 max |
Si | 1.0 max | 1.0 max | 0.5 max |
Mb | - | - | 2.5 - 3.5 |
Mechanical Properties of Incoloy Alloy Fasteners
Inconel 800/800HT | |
---|---|
Tensile Strength | Psi 75,000 , MPa 520 |
Yield Strength (0.2%Offset) | Psi 30,000 , MPa 205 |
Elongation | 30% |
Inconel 825 | |
Tensile Strength | Psi - 80,000 , MPa - 550 |
Yield Strength (0.2%Offset) | Psi - 32,000 , MPa -220 |
Elongation | 30% |